Stainless Steel 15-7 Internal Retaining Ring, 9/16" Shaft OD x 0.035" Thick x 0.62" OD (Pack of 10)

Stainless Steel 15-7 Internal Retaining Ring, 9/16" Shaft OD x 0.035" Thick x 0.62" OD (Pack of 10) Review

Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers.

Nylon 6/6 Retaining Washer, #2, 0.115" ID, 13/64" OD, 0.062" Thick (Pack of 100)

Nylon 6/6 Retaining Washer, #2, 0.115" ID, 13/64" OD, 0.062" Thick (Pack of 100) Review

Nylon 6/6 Retaining Washer, #2, 0.115" ID, 13/64" OD, 0.062" Thick (Pack of 100) Feature

• Retaining Washers grip the outside of the screw shank
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Similar to standard flat washers, but with a specially configured inside diameter designed to grip the outside of the screw shank. The washer slides on the screw easily, but is retained on the screw. For use in applications requiring pre-assembly of the screw and washer, to reduce final assembly cost.

Wiha 32695 Pliers, 90 Degree Angled External Retaining Ring, 3/8-Inch to 1-Inch

Wiha 32695 Pliers, 90 Degree Angled External Retaining Ring, 3/8-Inch to 1-Inch Review

Wiha 32695 Pliers, 90 Degree Angled External Retaining Ring, 3/8-Inch to 1-Inch Feature

• Made from high quality forged CV tool steel
• Induction hardened tips
• Heavy duty tool steel riveted box joints
• Soft vinyl grip handles are oil and solvent resistant
• Made by Wiha, 100% satisfaction guaranteed

Wiha Heavy Duty Forged 90º Bent - External Retaining Ring Pliers.Length 125mm (4.9 in.) Long, Tip Diameter .050 in.1.3mm, Ring Range 3/8 - 1 in. 10 - 25mm.Made from High Quality Forged CV Tool Steel. Hardened Tips for longest tool life. Heavy Duty Tool Steel Riveted Joints. Soft Vinyl Grip Handles are Oil and Solvent Resistant. Guaranteed Quality made In Germany.

Vibra-TITE 530 Green General Purpose Anaerobic Retaining Compound, 2ml Bullet Tube

Vibra-TITE 530 Green General Purpose Anaerobic Retaining Compound, 2ml Bullet Tube Review

Vibra-TITE 530 Green General Purpose Anaerobic Retaining Compound, 2ml Bullet Tube Feature

• Increases the shear strength on non-threaded cylindrical metal assemblies
• Fills voids between close-fitting metal assemblies
• Creates a solid one-piece assembly
• Seals joints against leakage
• Prevents corrosion

Vibra-TITE 530 High Strength Retaining Compound is a single part, low viscosity, fast curing anaerobic resin used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Vibra-TITE 530 can be used in a broad variety of applications such as locks keys and splines, locks bearings in place preventing spin-out, bonds rotor to shaft in low horsepower motors, augments press fits, locks bushings and sleeves in housings and on shafts, restores the fit to worn assemblies or out-oftolerance parts. This lower viscosity product is recommended for interference or press fit parts where large gap filling is not required. Ensure parts are clean, dry and free from oil and grease before use. Product is normally hand applied from the bottle onto parts. Fixture Speed with Primer is <5 minutes. Fixture Speed without Primer is 10-20 minutes at77 degree F. Shelf Life is 12 months at 68 degree F. 24 hours at 68 degree F Full Cure Time. Product should be stored in a cool and dry location at temperatures between -10 degree C to 30 degree C. Optimal storage is 22 +/- 4 degree C. Shelf life is 18 months from date of manufacture when stored at 22 +/- 4 degree C. General purpose. For stainless steel and other inert metal threaded pipes and fittings. Gasoline resistant. Low viscosity retaining compound recommended for diametral gap distances up to 0.005'' to augment press fits. 2000 Plus PSI Shear strength. 1.1 Specific gravity. N or T Suggested primer. 2 ml Bullet Tube.

Retaining Ring Pliers - Straight - .038 In Diameter

Retaining Ring Pliers - Straight - .038 In Diameter Review

Retaining Ring Pliers - Straight - .038 In DiameterFeatures: Retaining/snap ring pliers for automotive & light & heavy duty truck applications. Can be used on either inside or outside snap rings. Weight: 4 oz.

Pico 6240C 1/4" External Retaining Snap Ring 25 per Package

Pico 6240C 1/4" External Retaining Snap Ring 25 per Package Review

Pico 6240C 1/4" External Retaining Snap Ring 25 per Package Feature

• 1/4" External Size
• 25 per Package

Pico 6240C 1/4" External Retaining Ring 25 per Package

LOCTITE 609 Retaining Compound

LOCTITE 609 Retaining Compound Review

Type General Purpose Size 10mL Max. Temp. (F) 300 Shear Strength (PSI) 3000 Full Cure 24 hrs. Filling Gap Size Up to 0.005" Primer T Compound Type General Purpose Low Viscosity, Fast Cure Application Shaft Mount, Press Fit or Slip Fit/Housing Mount, Press Fit

Stainless Steel 15-7 Internal Retaining Ring, 7/8" Shaft OD x 0.042" Thick x 0.971" OD (Pack of 10)

Stainless Steel 15-7 Internal Retaining Ring, 7/8" Shaft OD x 0.042" Thick x 0.971" OD (Pack of 10) Review

Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers.

Stainless Steel 15-7 Internal Retaining Ring, 1" Shaft OD x 0.042" Thick x 1.111" OD (Pack of 10)

Stainless Steel 15-7 Internal Retaining Ring, 1" Shaft OD x 0.042" Thick x 1.111" OD (Pack of 10) Review

Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers.

Nylon 6/6 Retaining Washer, 5/16", 0.470" ID, 47/64" OD, 0.062" Thick (Pack of 100)

Nylon 6/6 Retaining Washer, 5/16", 0.470" ID, 47/64" OD, 0.062" Thick (Pack of 100) Review

Nylon 6/6 Retaining Washer, 5/16", 0.470" ID, 47/64" OD, 0.062" Thick (Pack of 100) Feature

• Retaining Washers grip the outside of the screw shank
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Similar to standard flat washers, but with a specially configured inside diameter designed to grip the outside of the screw shank. The washer slides on the screw easily, but is retained on the screw. For use in applications requiring pre-assembly of the screw and washer, to reduce final assembly cost.

Knipex 4411J0 Internal Straight Retaining Ring Pliers 5.75-Inch

Knipex 4411J0 Internal Straight Retaining Ring Pliers 5.75-Inch Review

Knipex 4411J0 Internal Straight Retaining Ring Pliers 5.75-Inch Feature

• For easy fitting of internal snap rings.
• For rings of 8 - 13 mm in diameter.
• Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes.
• Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life.
• Plastic coated handles.

Cutters, Pliers & Accessories Type: Straight Overall Length: 5-1/2

Knipex 4431J32 Internal 45 Degree Angled Retaining Ring Pliers 8.5-Inch

Knipex 4431J32 Internal 45 Degree Angled Retaining Ring Pliers 8.5-Inch Review

Knipex 4431J32 Internal 45 Degree Angled Retaining Ring Pliers 8.5-Inch Feature

• For easy fitting of internal snap rings.
• For rings 40 - 100 mm in diameter.
• Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes.
• Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life.
• Plastic coated handles.

A tool designed with your hand in mind. Even more power for easier working! KNIPEX quality-engineered and manufactured in Germany. KNIPEX’s Retaining Rings for internal snap rings / circlips are ideal for fitting internal snap rings in bore holes from 8 - 400 mm in diameter. Providing good access to confined work pieces, these Retaining Rings feature a solid, forged style and non-slip, solid tips. KNIPEX specializes in the development and production of high-quality pliers and is Europe's leading manufacturer of these products. It all started back in 1882 when C. Gustav Putsch set up his own forge shop in Cronenberg (now a suburb of Wuppertal). We are an independent fourth-generation family company. KNIPEX concentrates our knowledge and expertise on pliers. This is the only way to justify our claim that we are the best supplier in terms of quality, innovation and efficiency. Our success is assured by 800 qualified employees and we attach the greatest importance to their basic and advanced training.For easy fitting of internal snap rings.For rings 40 - 100 mm in diameter.Tips are forged inward to prevent retaining rings from slipping off and are used for installing & removing internal rings on the inside bore holes.Forged from chrome vanadium electric steel and designed to minimize tip breakage, and offer extended tool life.Plastic coated handles.

Zinc Plt Steel Self-Lock Ext Retaining Ring, 3/8" Shaft OD x .010" Th x .575" OD (Pack of 100)

Zinc Plt Steel Self-Lock Ext Retaining Ring, 3/8" Shaft OD x .010" Th x .575" OD (Pack of 100) Review

Self-locking internal and external retaining rings provide shoulders in housings or on shafts of low-carbon steel, cast material and plastic. They are applied by pushing them into the housing (internal ring) or onto the shaft (external ring) to the desired position. When applying reverse force to the ring, the prongs embed themselves into the housing or shafts, holding them in place. Once applied, they are difficult to dislodge, but can be readily removed with suitable pliers.

Zinc Plated Steel Internal Retaining Ring, 1" Shaft OD x 0.042" Thick x 1.111" OD (Pack of 100)

Zinc Plated Steel Internal Retaining Ring, 1" Shaft OD x 0.042" Thick x 1.111" OD (Pack of 100) Review

Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers.

Zinc Plt Steel Self-Lock Ext Retaining Ring, 1/8" Shaft OD x .010" Th x .325" OD (Pack of 100)

Zinc Plt Steel Self-Lock Ext Retaining Ring, 1/8" Shaft OD x .010" Th x .325" OD (Pack of 100) Review

Self-locking internal and external retaining rings provide shoulders in housings or on shafts of low-carbon steel, cast material and plastic. They are applied by pushing them into the housing (internal ring) or onto the shaft (external ring) to the desired position. When applying reverse force to the ring, the prongs embed themselves into the housing or shafts, holding them in place. Once applied, they are difficult to dislodge, but can be readily removed with suitable pliers.

Zinc Plated Steel External Retaining Ring, 3/4" Shaft OD x 0.042" Thick x 1.09" OD (Pack of 100)

Zinc Plated Steel External Retaining Ring, 3/4" Shaft OD x 0.042" Thick x 1.09" OD (Pack of 100) Review

Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers. The RE series is Carbon Steel with a Zinc Plated finish, except RE-2 and RE-3 which are Beryllium Copper.